The DM-ARM market strategy transfers the production of the metal roof panel from the traditional "brick and mortar" factory to a local service area, and many times at the actual project site. We integrate the entire supply chain from the steel or aluminum mill, to the installed roof. Since the metal roof panel represents only one component of the entire Drexel Metals roof system, we work together with owners, architects, designers and consultants to control every component used from the roof deck up to create the complete legitimate metal roof system. DM-ARM Member Classification (check one) * Authorized Fabricator - defined as a Regional Manufacture who acts as a Distributor in thier local market Certified Installer - defined as one who manufacturers and/or installs metal roof systems Your Name Member First Name: * Member Last Name: * Phone Number: * E-mail: * Company Information Company Name: * Company Address: * Company City: * Company State * Company Zip: * Panels Manufactured: Products that you manufacture - Check all that applies DMC 175S - 1.750" Snap Lock DMC 200S - 2" Standing Seam DMC FW1 - 1" Flush Wall Panel DMC 100NS - 1" Nail Strip DMC 100SS - 1" Standing Seam DMC 150SL - 1.5" Snap Lock with 1" male leg DMC 150SS - 1.5" Standing Seam DMC 5V ES-1 Edge Systems DMC 450 - 1.5" Snap Lock with 1.125" male leg DMC 450S - 1.5" Snap Lock with a 1.250" male leg Machines Machine #1 Manufacturer: How long have you owned the machine? Date of Last Maintenance performed on the machine? Machine # 2 Manufacturer: (If Applicable) How long have you owned the machine? Date of Last Maintenance performed on the machine? Machine # 3 Manufacturer: (If Applicable) How long have you owned the machine? Date of Last Maintenance performed on the machine? Manufacturer of your Brake? Do you ever require 20ft parts? Yes No Manufacturer of your Shear? ES-1 Perimeter Edge System Enrollment As a DM-ARM Member, you can enroll in the DM-ARM ANSI/SPRI ES-1 Fascia + Coping + GD-1 Authorized Fabricator Program. This program allows you to supply perimeter metals within your market with a $2000 annual 3rd party Inspection Program required due to ES-1 requirements and Certificate of Compliance Program. Do you want to participate in our ANSI SPRI ES-1 Program Yes - There is an annual fee of $ 2,000.00No National Account Programs As an Authorized Fabricator, you are entitled to participate in our National Accounts Program and manufacturer site certified metal roof systems for Drexel Metals On-Demand! National Accounts Program Yes - i would like to participate in the National Accounts ProgramNo Thanks! Quality Assurance Program Do you have an annual Quality Assurance Program? * Yes No If yes, with whom As a DM-ARM member you will be required to submit your panels for approval. Are you willing to comply with this requirement? * Yes No Please Note: DM-ARM shall submit a 12" panel to our QA department in Louisville for approval. Once the panel is approved our tech team will match up the appropriate clip system, engineering reports and all other approved system components. GOLD STANDARD WARRANTY As a DM-ARM member you are part of an exclusive group and are welcome to enroll in our GOLD STANDARD WARRANTY PROGRAM. The GOLD STANDARD SYSTEM warranty covers LABOR, MATERIALS and is TRANSFERRABLE for the life of the warranty period. The GOLD STANDARD warranty requires our members to install Drexel Metals products from the roof deck up, which includes: Met-Shield Underlayment, Drexel Metals clips and all accessorial products (Screws, rivets, Paint Pens). Would you like to enroll in our Gold Standard Warranty Program? * Yes No Would you like to attend the DM-ARM National Seminar? * Yes No CAPTCHAThis question is for testing whether or not you are a human visitor and to prevent automated spam submissions. Math question * 6 + 3 = Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.
